Technicalities

Acrylic Dyes on

Cationic Dyeable Polyester Fabrics

Presenting self shades on cationic dyeable polyester fabrics.

  • Acrylic dyes are modified basic dyes, specially suited for application on Acrylic and cationic dyeable polyester.
  • Acrylic dyes not only import excellent brilliancy, but also exhibit superior all round fastness properties on both the fibres.

Dyeing Method

The dye bath is set at 50 c, with

  • 1.0 – 2.0 gpl Glacial Acetic Acid (98%)
  • 0.2 – 0.5 gpl Sodium Acetate Crystal
  • 2.0 – 3.0 gpl Sodium Sulphate
  • 0.5 1.0 gpl Retarding Agent (CLA-100/CALCOXYNE ULTRA)
  • 0.1 0.2 gpl Water Softing Agent

Adopting Following dyeing cycle, improves the Levelling of the above dyes.

The goods are entered and run for 5 minutes. Predissolved Acrylic dye ( with 98% gla. Acetic Acid), is added and the temperature of the bath is slowly raised to 90c (1°c/minute) 10 minutes hold at 90°c. Then the temperature of the bath is raise to 120 0 (0.5°c/minute). Dyeing is continued for 30-45 minutes, depending on the depth of the shade. Bath is cooled to 60°-70°c and drained. Goods are Rinsed in cold and soaped at 80°c-90°c.
One bath of poly X cationic fabric
One bath of nylon X cationic fabric use Leoncal SF / Leoncal PC

  • This information is provided in good faith to the best of our knowledge and without liabilities.
  • The Shades were done under laboratory working condition
  • Please conduct sample trials before adopting the receipe for bulk use.